COMFORTPOOL BASIC 10, Руководство пользователя

Страница: 19 / 30

|
EN
19
1. General information
This manual provides information relating to the installation, utilization, and maintenance of our filtration
system. We recommend that you read this manual in its entirety and keep it for future reference.
The pump included with the filtration system is a horizontal, self-priming centrifugal pump. For the pump to
function correctly, the water temperature must not exceed 35
℃
/95
℉
. The materials used in the pump have
undergone stringent hydraulic testing and electrical inspections. The filter tank included in the filtration system
consists of high-grade polypropylene (PP). It is manufactured as a single unit and is corrosion resistant and
resistant to commercially available swimming pool chemicals. (Prerequisite: Compliance with the standard
recommended specifications for the pH- and chlorine value). It is equipped with a container drainage system,
pressure gauge, built-in container components, e.g., bottom strainer for even water distribution and a stable PE
separation wall between the filter and the filtered water chamber. The filter container comes ready to plug-in
and is supplied with a user-friendly 7 Position Multi-Port Valve integrated into the tank cover, an approved filter
pump with hair and lint basket, and a plastic base for ready on-site mounting.
Read this manual carefully before installation. The filtration system and pump must be installed in accordance
with all federal and local codes and standards in effect for the area of installation. We decline all responsibility
for the consequences of failure to comply with the installation instructions. We recommend that you comply
with the power source instructions to avoid overloading the pump motor and/or electric shock.
Filter material is not included.
1.1. Safety notes
Your filter pump was constructed and tested and left the manufacturing plant in technically operational
condition. To maintain this condition and ensure safe operation, the user should observe the notes and product
information contained in this technical manual. If there is any indication that safe operation is no longer
possible, the device is to be disconnected from the power supply and secured against accidental use.
This is the case when:
▪
The device has visible damage.
▪
The device no longer appears functional.
▪
After long periods of storage in poor conditions.