14
Microphone DM80
Bluetooth
TM
The Microphone DM80 can be connected to two Bluetooth telephones at the
same time. During a telephone call the DM80 is used as a hands-free that
receives the sound and transfers it on to the call partner. The sound from
the call partner's telephone is sent from the DM80 to a paired Digisystem
receiver.
When Bluetooth is activated in the menu, the Bluetooth symbol is shown in
the display . If only one telephone has been paired (and connected) with the
unit, the figure 1 appears at the Bluetooth symbol in the display. If two tele-
phones have been paired (and connected) the figure 2 appears instead.
Some DECT telephones are only connected during incoming or outgoing calls.
In such cases, the unit can also display a 1, even if a mobile and a DECT tele-
phone have been paired with the unit.
The DM80 supports hands-free profiles for Bluetooth.
Application - Bluetooth
TM
Activate Bluetooth:
Enter the menu Communication - Bluetooth - Enable
Bluetooth menu:
When BT only is selected, the transmitter is active only when the telephone
call is connected via Bluetooth or a headset cable is connected and activated.
Pair Mobile
(Communication - Bluetooth - Pair BT- Pair Mobile) (code 1234)
is used to pair a mobile with the DM80.
Pair Phone
(Communication - Bluetooth - Pair BT- Pair Phone) (code 0000) is
used to pair a landline-based, wireless (DECT) or mobile phone with the DM80.
Select Clear settings (Communication - Bluetooth - Pair BT- Clear settings)
to clear all information about paired units.
Please note:
After this the Bluetooth units have to be paired again (so that Blue-
tooth can work).
You can use Mix level to select how loud your own voice is during a phone
call.
Under Mic mode in the Communication - Bluetooth menu you can preset the
desired microphone mode for Bluetooth communication.
