9
Microphone DM80
Transmitting/receiving of pairing information along with a new code can be
performed from any Comfort Digisystem unit with a display.
To pair units without a display, see sections
Pairing (via pairing button)
for
more information. Pairing information or a new code key can be received by
several activated units.
Pairing (via menu)
1. Choose
Communication - Pair
2. Select
Receive info on one unit. Ready to receive pairing info is shown in
the display.
3. Select
New code on the other unit; select Yes.
4. Generate new code and send info? is shown in the display. Select Yes
(Now both the channel and the coding information have been sent, and
sound transfer is eavesdrop-secure).
5. To pair another unit into your coded system, select Send info instead on
one of your paired units.
Pairing (via pairing button)
(The only way of pairing units without a display, with the pairing button)
You can activate the Pairing function via the pairing button.
1. One brief press of the button opens the
Pairing
menu.
2. Two brief presses activate the Send info function.
3. One long press activates the Receive info function.
Cancel pairing function
When activating the pairing function, it is possible to cancel this function by
pressing the answering button. When you chose the BT pairing function and
you do not continue, the pairing function is canceled after 5 minutes.
Units with both transmitters and receivers built in
Comfort Digisystem units with both transmitters and receivers built-in can be
paired separately.
When opening the pairing menu, choose the concerning unit (transmitter/
receiver). In units with both transmitters and receivers, the pairing button
controls the transmitter.
The transmitter and receiver are paired separately in these units. The code
key is always the same for the transmitter and the receiver when these are
built-in in the same unit.
