Comfee SOGNIDORO-09E, Инструкция по эксплуатации

Страница: 37 / 76

16
Water drainage
-During dehumidifying modes,
remove the upper drain plug
from the back of the unit,
install the drain connector(5/8"
universal female mender) with
3/4" hose(locally purchased).
For the models without drain
connector, just attach the drain
hose to the hole. Place the open
end of the hose directly over the
drain area in your basement floor.
-During heating pump mode, remove
the lower drain plug from the back
of the unit, install the drain connector
(5/8" universal female mender) with
3/4" hose(locally purchased). For
the models without drain connector,
just attach the drain hose to the
hole. Place the open end of the
Hose adaptor directly over the
drain area in your basement floor.
NOTE: Make sure the hose is
secure so there are no leaks.
Direct the hose toward the drain, making sure that there are no kinks that
will stop the warter flowing.Place the end of the hose into he drain and
make sure the end of the hose is down to let the water flow smoothly.
(See Figs with . Do never let it up.(See Figs with ).When the
continuous drain hose is not used, ensure that the corresponding drain
plug and knob are installed firmly to prevent leakage.
-When the water level of the bottom tray reaches
a predetermined level, the unit beeps 8 times,
the digital display area shows "P1" . At this time
the air conditioning/dehumidification process will
immediately stop. However, the fan motor will
continue to operate(this is normal). Carefully
move the unit to a drain location, remove the
bottom drain plug and let the water drain away.
Reinstall the bottom drain plug and restart the
machine until the "P1" symbol disappears.
If the error repeats, call for service.
NOTE: Be sure to reinstall the bottom drain
plug firmly to prevent leakage before using the unit.
Remove the
upper drain plug
√
√
√
Continuous
drain hose
√ X
drain hose
adaptor
Continuous
drain hose
Remove the
lower drain plug
delivery lift <1.8m
drain hose
adaptor
drain hose
adaptor
X
Operation
Press the power
cord buckle into
the rear cover.