COMEX S.A.
CMX: 202023.01 EN
12
Device Reset
To reset all the settings to default locally, use Reset function in the LCD display.
To reset all the settings to default remotely, log in Web interface, enter the Reset page and
apply the function.
Unattended/Automatic Shutdown
PowerMaster Management Software automatically intitiates a graceful shutdown on the operating
system in an orderly fashion.
PowerMaster must be installed on every computer or server for which the shut down is to take place.
The computer will receive an SNMP message from the ATS PDU and will perform the shut down
according to the instructions provided, including shut downs at exact time and dates.
Follow the directions below for setting up Unattended/Automatic Shutdown.
Step 1. PC Configuration
1.
Install PowerMaster Client on every computer/server that will be part of the shut down process
(Follow the instructions in the PowerMaster Client user manual).
2.
Configure the settings in PowerMaster Client. See the PowerMaster Client User Manual for
additional help.
Step 2. ATS PDU Configuration
Verify that the IP address of all computers, that will be part of the shut down process, are included in
the Client List of the web interface.
Step 3. Notification
Notifying the computers of potential outlet shutdowns can be accomplished using the following
methods:
Outlets Control Menu: Performing the task of turning off or rebooting outlets
Scheduling Menu: Setting the application to perform the task of turning off or rebooting
outlets. The notification will occur prior to the scheduled date/time.
Outlet Overload: In the event of ATS PDU overload, notification will be sent prior to the ATS
PDU shutting down.
