Comet XRC-3023-WW, Руководство пользователя

Страница: 23 / 52

23
5.8. Preparing the unit for the further transport
DANGER
DANGER
Electrical danger!
Work on electrical installations may be carried out by trained and authorized electri-
cians only.

Switch off the unit before starting your work.

Disconnect the unit from mains by pulling the mains plug.

Secure the unit against being switched on again.

Verify that the unit is dead.

Carry out earthing and short circuiting.

Keep unauthorized persons away from the working area.
NOTE
Risk of damage due to improper transportation!
A coolant that has not been drained or a packaging with inappropriate dimensions may cause dam-
age during transport.

Drain the coolant before transporting the unit, see "Draining the coolant".

Use proper packaging.
Transporting the unit (after use)
Requirements
✓
Cooling operation finished.
✓
Unit switched off.
✓
Unit and coolant cooled down to the ambient temperature.
✓
Coolant hoses disconnected from the unit, see "Disconnecting the coolant hoses".
✓
Cooling water hoses disconnected from the unit, see "Disconnecting the cooling water
hoses".
✓
Coolant drained, see "Draining the coolant".
Tools and material required
–
Slot screwdriver
Procedure
•
Dismount the vent plug.
•
Mount the transport plug using the slot screwdriver.
•
Pack the unit according to the transport conditions that can be expected.
COMET advises to use original packaging, if available, or an equivalent packaging.
•
Mark the packaging with appropriate symbols; see "Symbols on the packaging".
The unit can now be transported.