Other possibilities of logger connection to monitored device by means of optional accessory
are described at the end of the manual.
Reading on the display in usual operation (logger switched ON)
After switching ON the instrument all symbols on the LCD are displayed
for about 2 seconds.
Then actual date and time in logger is displayed for about 4 s.
Consequently remaining battery capacity is displayed for about 2 s (value 0
to 100%). It is valid if logger is operated at temperature from -5 to +35°C. If
logger is operated often outside of the above temperature range battery life
can be reduced to 75%, i.e. if displayed remaining battery capacity drops
below 25%, it is recommended to replace the battery.
If LCD is switched ON
, actual readings are displayed then – counter value
on the upper line (with respecting of optional user recalculation to real input
quantity). Lower line displays binary input actual state. Symbol On
indicates closed contact (respectively low voltage level), symbol OFF
indicates opened or not connected contact (respectively high voltage level).
Symbol LOG indicates logging in progress – if it blinks, data memory is
filled for more than 90%.
If counter value exceeds LCD 19999, symbol E and three lowest bits of
counter value are displayed to inform on counter activity.
6
IE-LOG-S7021-04
