Comet IoT Sensor plus W0841, Инструкция по эксплуатации

Страница: 15 / 31

ie-wfs-Wx8xxPlus-01
15
W0841E
Four inputs transmitter for external
Pt1000 probes with Cinch connector
The transmitter measures the temperature from four
external probes of the Pt1000/E line (the probe is
not part of the instrument). Response to the jump
temperature change is usually much faster than the
models from the internal sensor. The transmitter is
often used to monitor locations where only a
measuring probe is installed and the device itself is
in a suitable location from a radio range point of
view. The maximum recommended probe length is
15 m. The transmitter is equipped with an external
power input.
W6810
Compact temperature, relative humidity
and CO
2
concentracion transmitter
The transmitter measures the temperature, relative
humidity and dew point temperature by means of
internal sensors located under the cap with a
stainless-steel air filter. The CO
2
concentration is
measured by a sensor located inside the transmitter
box, which is equipped with vents at the top. The
device is characterized by a simple compact design,
but a relatively longer response to a step change of
measured quantities than those with an external
probe. The instrument is placed directly into the
measured area. The transmitter is equipped with an
external power input.