Instructions and operating manual sweeper CSW 1300 B (translated from original instructions)
pag. 55
REPLACEMENTS
u
REPLACING THE CENTRAL BROOM:
(this operation must be carried out using gloves, mask to protect the respiratory tract, 10/17 mm keys , with
the motor off).
1. Disassemble the left side (on the driver’s side)
Part. 1 (LT) Fig. 17
, by simply lifting it out of the bayo-
net joints.
2. Unscrew the two clamping screws from the semi-arm
Detail 4 Fig. 17
;
3. Unscrew the three screws that surround the side casing
Detail 5 Fig. 17
.
4. Slide off the side broom
Detail 6 Fig. 17
and replace it, being careful of the direction of the bristles,
which must be set up as in
Figure 17
.
5. to complete assembly, repeat the operations in reverse order.
6. Adjust the height of the new broom (see paragraph
“Central Broom Adjustment”
).
Fig. 17
