Instructions and operating manual sweeper CSW 1300 B (translated from original instructions)
pag. 51
CHAPTER 10 – CHECKS BEFORE IGNITION
1. Check the battery solution level and, if
necessary, top up with distilled water.
2. Make sure that the connector
Detail 1 Fig.
12/B
is plugged into the relative plug.
3. Make sure that the emergency mushroom
button
Detail 1 Fig. 12/A
is not pressed
down
CHAPTER 11 – IGNITION AND STOP
BEFORE PROCEEDING IT IS NECESSARY TO HAVE READ ALL OF THE PREVIOUS CHAPTERS.
IMPORTANT: To start up the machine you must be seated in the driver’s seat. If the operator is not
seated, or if he/she stands up once the machine has been switched on, it will switch off.
u
IGNITION:
Turn the key
Detail 6
in the control panel
(Fig. 11)
clockwise.
Engage the lever
Fig. 10
to switch the motor on, make the central broom spin and switch on suction.
The machine is in working position when the central broom is lowered and suction is enabled.
u
FORWARD DRIVE:
Position the selector
Detail 7
in the control panel
(Fig. 11)
in the forwards direction and press the
drive pedal with your foot
Detail 3 Fig. 7.
u
REVERSE:
Position the selector
Detail 7
in the control panel
(Fig. 11)
in the reverse direction and press the drive
pedal with your foot
Detail 3 Fig. 7.
u
NEUTRAL:
Place the selector
Detail 7
in the control panel
(Fig. 11)
in the central position for the machine will be
in neutral.
u
STOP:
Release the drive pedal
Detail 3 Fig. 7
; you will notice that the machine tends to stop within a short
distance, if you wish to stop press the brake pedal abruptly
Detail 1 Fig. 7
.
Fig. 12B