Comet CRRC 120 ECO, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 40 / 92

40
NON-ROUTINE MAINTENANCE
CAUTION
• Non-routine maintenance must be carried out only by a
SPECIALIST TECHNICIAN
.
For non-routine maintenance, follow the instructions in the table below.
MAINTENANCE INTERVALS INTERVENTION
At the end of every season or once a year. • Check tightness of EVERFLO motor pump screws.
• Check safety devices.
WARNING
• The data shown in the table are for indicative purposes. More frequent intervention may be required
in the event of particularly heavy use.
HANDLING AND TRANSPORTATION
CAUTION
• Carry out the procedures described in the section “SHUT-DOWN” before handling or transporting the
machine.
• When transporting the machine, remember to anchor it firmly onto the transportation vehicle (using
ropes or other adequate systems) and empty the tank.
• Grasp the handles (7) firmly, to prevent impact or shocks induced by the terrain from making you lose
your grip. Keep this in mind, especially when the tank is full and the ground is wet.
• The machine must only be moved using the gripping points provided by the handles (7).
• Do not wheel the machine on gradients of more than 2% or on very wet ground.
DEMOLITION AND DISPOSAL
CAUTION
• Before scrapping the machine make it unusable, for example, by cutting the connection cables to the
battery and make harmless those parts that may pose a hazard to children who may use the machine
as a toy. Remember to completely empty the tank.
Demolition of the machine must only be carried out by qualified personnel and in compliance with the
legislation in force in the country where it has been installed (also refer to the information in the section
“IDENTIFICATION AND WARNING LABELS” ) .
WARNINGS ABOUT THE MATERIALS (REACH)
CAUTION
Up-to-date information is available at:
www.comet-spa.com/it/company/legal /
TROUBLESHOOTING
CAUTION
• Before carrying out any interventions, carry out the procedures described in the section “SHUT-DOWN” .
• If correct operation of the machine with the assistance of the information contained in the following
table is not possible, contact a
SPECIALIST TECHNICIAN
.