Comet CRRC 120 ECO, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 36 / 92

36
conditions.
• Before starting the machine, read carefully this manual, the EVERFLO motor pump manual and the
manual of the CBM module included on the machine. In particular, ensure that operation of the machine
is understood with regard to liquid shut-off procedures.
• The machine is not designated for use by persons (including children) whose physical, sensory or mental
capacities are impaired or who lack experience or knowledge, unless they have been given supervision
or instructions regarding the use of the machine and, where appropriate, any included combustion
engine, by persons responsible for their safety.
• Children must be supervised to ensure they do not play with the machine.
• Particular attention must be paid when operating the machine in environments where there are moving
vehicles that may crush or damage the charger power cord, the delivery hose or the lance.
• Observe the safety instructions in the manual of any optional accessories that are used.
• Before operating the machine, place it in a dry, level and stable position to prevent it from falling or
overturning.
• Perform the procedures described in the “SHUT-DOWN” section before moving the machine.
• Before using the machine, wear clothing that provides adequate protection from incorrect handling
of the high-pressure fluid jets and chemicals used.
• During operation:
- always keep the machine under observation and out of the reach of children; in particular, take great
care when using it in crèches, nursing homes or retirement homes, as children, elderly or disabled
persons may be present without supervision;
- do not direct high-pressure jets against materials containing asbestos or other substances hazardous
to health;
- do not cover the machine and do not place it in locations with no adequate ventilation (remember
this especially when using the machine indoors);
- when not in operation, before leaving the machine unsupervised even for short periods of time, before
topping up the chemical product and before any intervention, carry out the procedures described in
the “SHUT-DOWN” section and, in particular, do not leave the machine without having first disconnected
the battery;
- the operating pressure must never exceed the maximum rated value for the machine (see also the
section “SPECIFICATIONS AND TECHNICAL DATA” );
- use appropriate personal protective equipment against noise emitted (e.g. ear defenders);
- Grasp the lance firmly, as when the control trigger is used to deliver the product, the user will feel a
reaction force of the high-pressure jet.
• CAUTION.
Do not use the machine in the vicinity of persons unless they are wearing protective clothing.
• CAUTION.
Do not direct high-pressure jets at yourself or other people to clean clothing or footwear.
• CAUTION.
High pressure jets may be dangerous if used incorrectly. High pressure jets must not be
directed towards persons, live electrical equipment, or the machine itself.
• CAUTION.
Risk of explosion - Do not spray flammable liquids.
• Do not use machine in the rain.
• Pay particular attention to the information in the section “WARNINGS REGARDING PUMPED CHEMICALS” .
• Do not pull the charger plug out of the power outlet by pulling the power cord.
• Keep the charger power cord, any extension cords, plugs and sockets dry. Do not touch them with wet
hands.
• If the charger power cord is damaged, contact a
SPECIALIST TECHNICIAN
for replacement.
• Do not approach moving parts of the machine even if they are adequately protected.
• Do not remove the protective cover from the CBM module.
• Do not use on hoses containing liquids under pressure.
• Do not carry out maintenance on the machine when in operation.
• Follow the instructions in the “DESIGNATED USE” section .
• Do not modify the machine assembly in any way. In particular, do not modify fastenings, hydraulic
fittings or protections.