Comet Commeter D0221, Инструкция по эксплуатации

Страница: 9 / 20

IE-COM-D0221-05
9
Temperature
T1 of channel 1 is displayed on the upper LCD line in °C,
temperature T2 of channel 2 is displayed on the lower LCD line in °C.
Press DISPLAY key to display the difference of temperature between
channels (T dif = T1 - T2) on the LCD lower line (marked by DIF).
The difference is displayed only if both temperature probes are connected.
LCD upper line still displays temperature T1 of channel 1
Function HOLD (storing of actual measured values) and
minimum a maximum memory
Press HOLD key in the default mode (displaying of actual measured
temperature) to store actual measured value to internal memory
(indicated by short beep). Anytime it is possible to display stored value
from MENU (see below). Each pressing of the HOLD key in the default
mode causes value stored in HOLD memory is replaced with actual
temperature.
Switched ON instrument permanently updates minimum and maximum
memory of temperature. Press MIN key (resp. MAX key) in the default
mode to display minimum (resp. maximum) reading. These minimum and
maximum readings are indicated by MIN (MAX) symbols on the LCD.
Pressing MIN (MAX) or MENU key again to return to default mode.
Minimum and maximum memory is cleared from menu after confirmation
selection CLR (see below). Values in HOLD, MIN and MAX memories
remain stored even after instrument is switched OFF.
Functions and settings available from menu
Press MENU key to enter mode of viewing menu items one by one. Press
arrow keys up and down to list all menu items. Press MENU key again to
return to default mode (displaying of actual measured values).