Comelit VIP System, Руководство по установке

Страница: 53 / 88

53
If the Lock-release f unction is selected:
1. Select the mode for which you wish to change the function using ,
and press to confi rm.
CONFIGURE RELAY
Configuration at rest time
Configuration during call
2. Select the fi elds which can be changed using , and change the
value using , or .
RELAY DURING CALL
Door 0 0 0 0 0 0 0 0
Interlocutor
Active:
Left Right
Relay 1
Door 0 0 0 0 0 0 0 0
Interlocutor
Active: Relay 1
• Confi guring the key button
1. Access the installer menu.
INSTALLER MENU
Configure buttons
2. Select the Confi gure buttons menu by pressing , and press
to access it.
3. Press to access it.
CONFIGURE BUTTONS
Configure key button
1 2
4. Select the mode for which you wish to change the function using ,
and press to confi rm.
CONFIGURE RELAY
Configuration at rest time
Configuration during call
5. Select the fi elds which can be changed using , and change the
value using , or .
RELAY DURING CALL
Door 0 0 0 0 0 0 0 0
Interlocutor
Active:
Left Right
Relay 1
Door 0 0 0 0 0 0 0 0
Interlocutor
Active: Relay 1
6. Press to exit and save the changes.
ACTUATOR SETTING
0 0 0 0 0 1 0 1
ViP address:
Left Right
Output
Module 255
Active:
0 1
If the Actuator function is selected:
• The VIP address fi eld identifi es actuator module Art. 1443.
• In the Module fi eld, select whether to activate the relays on board
the module (255) or those on the expansion module Art. SK9071
connected to it (1 to 10)
.
• In the Output fi eld, select the relay you intend to activate. 1 or 2 if
you enter 255 in the module fi eld. 1 to 10 if you enter an expansion
module in the module fi eld.
If the Activate Output f unction is selected:
The button will control an NC/NO output which can be programmed as
monostable or bistable.
For output confi guration, see page 56.