5
turned ON.
Check the network cable; make sure it is properly connected to the switch and the
network device.
Check the network cable; make sure the UTP cables comply with the specifications
described in section 5.
5 Technical Specifications
Standards
IEEE 802.3 10BASE
–T, IEEE 802.3u 100BASE–TX, IEEE802.3ab 1000BASE-T
，
IEEE 802.3x Flow Control and IEEE 802.3az(EEE
– Energy Efficient Ethernet)
Network Cables
Ethernet (10Base-T) cables: 2-pair UTP Cat. 3, 4, 5; up to 100m
Fast Ethernet (100Base-T) cables: 2-pair UTP Cat. 5; up to 100m
Giga Ethernet (1000Base-T) cables: 4-pair UTP Cat.5E;up to 100m
Ports
16 x 10/100/1000Mbps Auto-Negotiation RJ45 Port
Access Method
CSMA/CD
Transmission Method
Store and Forward
MAC Address Table
8K
Jumbo Frame
9K byte jumbo packet length forwarding at wire speed
Data Transfer Rate**
Ethernet: 10/20Mb/s
– Half/Full-Duplex
Fast Ethernet: 100/200Mb/s
– Half/Full Duplex
Giga Ethernet 1000/2000Mb/s
– Half/Full Duplex
LED
Power: Green
Link/Activity: Green
