3
Port 1~16 10/100/1000Mbps Status LEDs
LED
Color
Status
Solid
Blinking
Off
LINK/
ACT
Green
The respective
port is connected
but no activities
on the
10/100/1000Mbps
Ethernet network
The port is
transmitting or
receiving data at
10/100/1000Mbps
No
link
2 Installing the switch
The site where you place the switch may greatly affect its performance.
2.1 Installation
Please follow the below guidelines to install the switch:
Please install the switch in a fairly cool and dry place. Please refer to the Technical
Specifications for the acceptable temperature and humidity operating ranges.
Please install the switch on a sturdy, level surface that can support its weight.
When connecting the power cord to the switch and the power outlet, the distance
should be no more than the length of power cord.
Please leave at least 10cm (about 4 inches) of space at the front and rear of the
switch for ventilation.
2.2 Desktop or Shelf Installation
When installing the switch on the desktop or shelf, please attach the rubber feet to the
switch. Peel off the protective paper on the pads and attach them to the bottom of the
switch (one at each corner).
2.3 Rack Installation
The switch is rack-mountable and can be installed on an EIA 11-inch equipment rack. To
do this, first install the mounting brackets on the s
witch’s side panels (one on each side),
secure them with the included screws and then use the screws provided with the
equipment rack to mount the switch.
