Comelit IPNVR916A, Руководство пользователя

Страница: 94 / 135

User’s Manual
86
− Bit Rate Limit
: Enter the maximum bit rate. You can control the network bandwidth by limiting the
bit rate depending on the network traffic.
Audio
Source Configuration
: Displays the source
configuration information (Configuration: audio
source, Name: source name, Use Count: the
number of profiles that use the source, Source
Token: the number of tokens).
Encoder Configuration
: Set up an encoder.
− Audio Encoder Configuration : Select an
audio encoder from the list of the audio
encoders supported in the device.
− Name
: Assign a name to the selected audio
encoder.
− Use Count : Displays the number of profiles
that use the selected audio encoder.
− Encoding
: Select an audio compression codec.
− Bit Rate : Select a bit rate.
− Sample Rate
: Select the sampling rate. The
higher the value is, the better the sound quality
and the larger the data size.
I/O
Mode
: Set the relay mode for the input and
output devices.
− Monostable : After setting the idle state, the
relay returns to its idle state once the delay
time expires.
− Bistable
: After setting the idle state, the relay
remains in this state.
Delay Time : Set the delay time until the relay returns to its idle state in the Monostable mode.
Idle State
: Set the physical idle state of a relay output.
− Open
: Indicates that the relay is open when the relay state is set to Inactive and closed when the state
is set to Active.
− Closed
: Indicates that the relay is closed when the relay state is set to Inactive and is open when the state
is set to Active.
Action
: Controls the relay state.
− Active : Clicking the button sets the relay state to Active.
− InActive
: Clicking the button sets the relay state to InActive.