Comelit IPNVR916A, Руководство пользователя

Страница: 18 / 135

User’s Manual
10
User’s Manual about enabling the ONVIF Conformance protocol in the device, as procedures may differ
for each model.
3. Click the
Add Devices button at the bottom.
Name
,
Address
,
Device Type
: Displays the name, IP address (or mDNS number) and type of the
selected device. The name will be updated automatically depending on the settings of the device.
ID , Password : Enter the user ID and password which you set in the device in order to connect to that
device remotely. The connection to the device is allowed only to the users under the
Administrator
group of the device, and recording is allowed only to the
admin
user under the
Administrator
group
of the device.
Recording Service : Select a recording service (supported only for the network video devices). The
device is registered on the recording service and the recording service performs recording according
to a recording schedule. The channel number of the recording service indicates the maximum number
of cameras that can be registered, and the name indicates the name of a recording service, which was
set during the Service menu setup. When selecting the
Do not record option, the iNEX program treats
the device during the Schedule setup as though it was not registered and does not perform any of the
scheduled activities associated with the device. If you delete the device from the recording service
after some recording has been done, you cannot search or play back the previously recorded video
though you register the device again. You can check the list of devices registered on the recording
service on a
Device Setup
tab while setting up the recording service in the Service menu. Refer to
Chapter 12 — Storage Management (p. 91) for details.
Apply to All Devices : Select to apply the same user ID and password to all selected devices if you
selected more than one device and the selected devises have the same user ID and password.
NOTES:
If the device is a DVR, it might be necessary to enter the DVR port numbers depending on the specifications
and version of the DVR.
When registering a four-channel network video transmitter which uses the iNEX protocol, all four cameras
are automatically registered even if some of the four cameras are disabled.
4. Click
Device Group in the Site panel, and then the button at the bottom of the Site panel. The Add
Device Group
window appears.