Comelit IPNVR016A, Руководство пользователя

Страница: 87 / 140

Network Video Recorder
77
NOTES:
Depending on the model, the device may not be supported even though the iNEX program supports the
device's protocol. Ask your dealer or distributor about supported models.
If the device uses the ONVIE Conformance protocol, you can select either the manufacturer (or iNEX
protocol) or the ONVIE Conformance protocol. However, it is possible that one or both of them are not
supported depending on the device model. Ask your dealer or distributor for details. Refer to the device
User’s Manual about enabling the ONVIE Conformance protocol in the device, as procedures may differ
for each model.
2. Click the Add Devices button at the bottom.
Name , Address , Device Type : Displays the name, IP address (or mDNS number) and type of the
selected device. The name will be updated automatically depending on the settings of the device.
ID
,
Password
: Enter the user ID and password which you set in the device in order to connect to that
device remotely. The connection to the device is allowed only to the users under the Administrator
group of the device, and recording is allowed only to the admin user under the Administrator group
of the device.
Recording Service : Select a recording service (supported only for the network video devices). The
device is registered on the recording service and the recording service performs recording according
to a recording schedule. The channel number of the recording service indicates the maximum number
of cameras that can be registered, and the name indicates the name of a recording service, which was
set during the Service menu setup. When selecting the
Do not record
option, the iNEX program treats
the device during the Schedule setup as though it was not registered and does not perform any of the
scheduled activities associated with the device. If you delete the device from the recording service
after some recording has been done, you cannot search or play back the previously recorded video
though you register the device again. You can check the list of devices registered on the recording
service on a
Device Setup tab while setting up the recording service in the Service menu. Refer to
Chapter l2— Storage Management
(p. 9l) for details.
Apply to All Devices : Select to apply the same user ID and password to all selected devices if you
selected more than one device and the selected devises have the same user ID and password.
NOTES:
If the device is a DVR, it might be necessary to enter the DVR port numbers depending on the specifications
and version of the DVR.
When registering a four-channel network video transmitter which uses the iNEX protocol, all four cameras
are automatically registered even if some of the four cameras are disabled.
3. Click
Device Group
in the
Site
panel, and then the button at the bottom of the
Site
panel. The
Add
Device Group window appears.