Comelit IPNVR016A, Руководство пользователя

Страница: 19 / 140

Network Video Recorder
9
Protocol
: Select the protocol or manufacturer of the device to scan. Event related functions are not
supported for devices that do not use the iNEX protocol, and some other functions may not be supported
depending on the settings of the device.
Scan Mode
: Select the scan mode. Clicking the
Start Scan
button displays the results in the list. If
the IP address range of the device is different from that of the NVR system, the iNEX program considers
the IP address invalid. In this case, you must change the device’s IP address to register the device.
Auto Scan (LAN)
: Lists devices in a LAN environment (supported only for the network video devices).
If the device uses the ONVIF Conformance protocol, this function is supported only when you have
checked the
Disable WS-Discovery Windows Service (fdPHost, EDResPub)
box during the
software installation in Microsoft
®
Windows
®
Vista or later operating systems.
IP Address : Allows you to enter the IP address of a device. You can search more than one device
at a time by entering a range of IP addresses.
DVRNS : Allows you to enter the device name registered on a DVRNS server if the device uses the
DVR Name Service (DVRNS) function.
Domain Name : Allows you to enter the device’s domain name registered on a DNS server if the
device uses the Domain Name Service.
: Select the devices to register by checking the box beside each device name in the list. Selecting
the Select All box selects all devices in the list.
NOTES:
Depending on the model, the device may not be supported even though the iNEX program supports the
device's protocol. Ask your dealer or distributor about supported models.
If the device uses the ONVIE Conformance protocol, you can select either the manufacturer (or iNEX
protocol) or the ONVIE Conformance protocol. However, it is possible that one or both of them are not
supported depending on the device model. Ask your dealer or distributor for details. Refer to the device
User’s Manual about enabling the ONVIE Conformance protocol in the device, as procedures may differ
for each model.
3. Click the Add Devices button at the bottom.
Name , Address , Device Type : Displays the name, IP address (or mDNS number) and type of the
selected device. The name will be updated automatically depending on the settings of the device.
ID
,
Password
: Enter the user ID and password which you set in the device in order to connect to that
device remotely. The connection to the device is allowed only to the users under the Administrator
group of the device, and recording is allowed only to the
admin
user under the
Administrator
group
of the device.