20
a
b
c
f
Configure the
Additional Actuator button
to control an extra action during a call through the activation of an additional
relay, completing the following fields:
Enabled
From the pull-down menu, select enable/disable the Additional Actuator button.
ViP address
Enter the ViP address
Expansion index
From the pull-down menu, select the "actuator module" or expansion you wish to to control (from 1
to 10)
Output index
From the pull-down menu, select the number of the relay (1 or 2) or the expansion number (from 1 to
10) that you wish to control
Additional Actuators
8) Message server configuration
The following procedure describes how to specify on the art. 1456 / 1456S the IP or ViP address of the art. 1952 device to be
used as a message server (if present)
1.
Select device 1456 / 1456S and select
Configuration/Message server [a].
2.
From the pull-down menu
[b]
select
ViP address or IP address
and enter the address of the CPS device that is to be used
as a message server.
3.
Press
Write page [c]
to save the current settings
.
