Comdial and FXT, Инструкция для обслуживающего персонала

Страница: 108 / 164

Telephone Line Naming
You can assign names to lines to aid users in identifying the proper line to use. A
line name can be up to seven letters in length and will show up in the user’s
display.
•
Name the system telephones as follows:
1. USE letter code table (page 92) to compose names for all lines
requiring them (up to seven letters per name are allowed) and
record the names on the line name record (page 99).
2. PRESS
INTERCOM
.
3. DIAL
*#0*33
.
4. DIAL code to choose line:
• DIAL
1#
to
99#
for lines 1–99,
• DIAL
100
to
128
for lines 100–128.
NOTE: If the desired line code is less than three digits, you must dial
#
once after you dial the line code.
5. DIAL
#
to clear any current name.
6. DIAL 2-digit codes that correspond to letters in name (line names
must begin with a letter).
7. DIAL
#
to save name or cleared name.
8. REPEAT steps 4 through 7 until all telephones are named.
9. PRESS
SPEAKER
to end.
98 Attendant Manual
Attendant Features GCA70-250