22
RNG200N OPERATOR’S MANUAL (501-3337900) B783
DRAFT
SOLVING PROBLEMS (cont.)
Check
Suggested solution
Further checks, if there is still a problem
Can you hear stereo
sound?
YES
D
NO
R
First check that the program is likely to have
stereo sound (an old movie, for example, may
not be in stereo).
Check the on-screen Setup Menu, Audio
settings (see page 20). The Stereo Output may
be set to “Mono”. Change it to “Stereo”.
If your TV is mono, you will hear stereo sound only if
you have a stereo audio amplifier and speakers or home
theater connected to your stereo VCR or set-top.
Can you see and hear a
DVD that you are trying to
play?
YES
D
NO
R
Check that all the audio and video cables are
securely and correctly connected, including
any to a home theater receiver that you may be
using to enhance the sound.
—
Is the picture low quality,
or “fuzzy”, when you are
expecting to see an HDTV-
quality picture?
NO
D
YES
R
Some programmes may include “copy
protection” which means, if your set-top is
connected to your HDTV via the component
video connectors, the picture is downgraded
to standard TV quality. To prevent this from
happening, use an HDMI connection instead.
—
Are the DVR functions
working?
NO
R
The internal hard disk may be temporarily
disabled because your set-top has overheated.
Make sure your set-top is not overheating
(refer to the set-top’s ventilation requirements
on page 4).
—
