8
www.combisteel.com
10. Daily maintenance
Note: You must power off the showcase before servicing or cleaning.
Note: Ensure that the working area is bright enough during maintenance or cleaning operations. If necessary,
use other light sources. Also note that the hot and removable parts have been marked on the related logo.
Cleaning of the showcase
1) Wash out the outer surface of the showcase every week, please use the soft cloth with mild soap or cleaning
agent dissolved in cold water to wipe it carefully. Do not use detergent ,solvent or only clean water.
2) Clean the condenser at least once every 30 days with a hard non-metallic brush. Non-clean condensers affect
the cooling performance, resulting in energy waste.
Follow these steps below:
Power off the showcase by turn off the switch power on the wall;
Remove the goods stored in the showcase to cold storage or other refrigeration equipment that has sufficient
capacity to meet the requirements of freshness;
When the temperature of the showcase reach to room temperature, do not use a knife or similar tools to remove
the ice on the evaporator, let it melt naturally;
Clean the inside of the showcase thoroughly and use the soft cloth with mild soap or cleaning agent dissolved in
cold water to wipe it carefully.
After the showcase being completely dry by carefully checking, re-install and turn on the showcase.
Before putting the goods back to the showcase, it needs to run 2-3 hours.
Any maintenance operations that are not covered above must be carried out by a designated after-sales service
provider or a qualified person.
11. Emergency
1) Showcase cannot be started or continue to work:
1. May be the power cut;
2. Power on the wall is off;
If it is not the reason above, please contact the after-sales service provider nearby, remove the food in the
showcase to the cold storage or other refrigeration equipment that can guarantee the normal temperature of
food storage.
2) Showcase refrigeration is not normal:
The condenser may have dirt that make it not be heat exchanged. If it is dust or dirt, clean up the condenser
thoroughly.
12. After-sales service
If you need technical assistance, please contact the salesperson immediately. If you need accessories or spare
parts, please contact with after-sales service provider. Please insist on using of original accessories or spare parts.
13. Decomposition and handling
In order to protect the environment, please follow the provisions of the national waste disposal regulations to
store the parts and materials of the showcase, so that these materials can be properly handled and recycled. All
parts cannot be regarded as urban solid waste, except for metal parts. In most of European countries, metal parts
are not considered as the special garbage. Components that make up the refrigeration system cannot be reused
or used separately, please send them to the center of professional recycling refrigeration equipment.
