6
www.combisteel.com
1.Overview
The 7090.0020 and 7090.0025 refrigeration showcases are for storing frozen fruit or sliced fruit. The dimensions:
1370 x 1080 x 960. Its features are clearly stated in the figure on page 2.
2. Transportation
These showcases are packed in special wooden boxes for forklift transportation. Carry the equipment onto a self-
contained pallet or similar platform and use a manual or electric lift truck with sufficient weightlifting capacity
to carry such a showcase. Please assign after-sales service provider to deal with the handling.
3. Delivery and storage
Before confirming receipt of the goods, please check the external package of the showcase. If the package is
damaged, please unpack it in front of forwarder and sign it on the delivery note. Please keep the delivery note
and reserve the right to claim on the forwarder. Vendor or supplier shall not be liable for any damage caused by
incorrect handling during transportation or storing. Unpacking work should be operated by the designated after-
sales service providers. The showcase cabinet should be stored between 25°C and 45°C and the air humidity
should be between 30% and 80%. Showcase should stay away from direct sunlight and electronic components.
4. Installation and use of the environment
Note: The showcase must not be installed in a room with explosive gas and cannot be used outdoors or in the
rain.
Before connecting the showcase, please confirm that the data on nameplate of showcase matches the existing
parameters (see table on page 5). Correct operation: Put the showcase on the flat floor, stay away from heat and
(or) direct sunlight, door, windows, fan or vent. In front of the showcase, leave the appropriate space for
customers to pick up goods, when the two showcases are placed back-to-back, please make sure the outlet of
condenser toward the outside to avoid compressor’s high pressure protection.
Clean up the water in the drainage pate at least on time every day, twice better.
The showcase is equipped with the small casters for moving. If the position of the showcase has been fixed, you
can use the spherical device at the bottom of the cabinet to lock the casters.
5. Electrical connection
Note: In front of the showcase you must install a multi-pole power switch with sufficient power off capability
and a contact spacing of at least 3mm. In any emergency situation, the position of the power switch must be
reached to the maximum distance of 3 meters. Each person who may operate the showcase must know the
location of the power switch.
The installation of the showcase must be carried out by the professional in accordance with the manufacturer's
instructions and local regulations. Any incorrect installation may cause injury to people, animals and property.
The cabinet is equipped with a 1.5 meter wire and a related plug. Do not exceed this length when connecting to
a wall socket.
The power cord must be properly wired and away from shock, liquid, heat, and maintained in good condition. If
the power cord is damaged, it must be replaced by a professional. It is not recommended to use an adapter plug.
Only when it is necessary, can use qualified models and ensure proper grounding.
Confirm that the supply voltage matches the voltage value indicated on the nameplate of the showcase. Please
note that the maximum voltage range is ± 6%.
Note: The showcase must be properly grounded. The vendor or supplier is not responsible for any hazardous
consequences resulting from non-compliance with this safety guideline. If the showcase has to be installed away
from the power supply, make sure that the circuit is properly connected in accordance with national regulations.
The manufacturer shall not be liable for any personal injury or property damage caused by improper electrical
installation.
