Vehicle seat belts with locking latch plates
(fig. h)
normally hold a car seat
tightly. However in some cases, the locking latch plate on some seat belts
may slip and loosen after being buckled on car seat if positioned at a certain
angle. If this happens, flip the latch plate over and re-buckle. Test installation
again to see if this works. If not, move car seat to another seating location.
(fig. h)
Flip
Combination Lap/Shoulder Belt with Locking Latch Plate
53
54
Section 19 - Additional Information
This car seat meets or exceeds all applicable requirements of Federal Motor Vehicle Safety Standard
213 for use in motor vehicles.
Certification
This car seat is NOT certified for use on aircraft.
This car seat will not accept aircraft seat belts.
Aircraft Use
Car seat parts can get very hot in the sun or warm weather.
To avoid burns, always check before putting child in car seat.
Warm Weather
Protect vehicle seat. Use a thin car seat mat, thin towel or thin blanket under and behind car seat.
Vehicle Seat Protection
DO NOT use after 7 years from date of manufacture on label.
Car Seat Useful Life
Store instruction manual in pocket on back of seat pad.
Instruction Manual Storage
