Combi I-Thruller, Инструкция по эксплуатации

Страница: 20 / 59

According to age and weight of a child, there are two operating modes.
Seat Mode
Assembly steps
①
Unfasten snap as shown.
( Figure 2.5 )
②
Pull out the strap from foot area of seat unit, secure the buttons on both sides in the
direction as shown.
( Figure 2.5-2.9 )
③
Pull the strap to one side to tighten and secure the seat back.
If unable to fasten snaps properly doing step
②
, push the foot end of seat unit upwards
slightly and then repeat step
②
again.
④
Line up and insert the hubs on both sides of the Seat into the hub slots on the Stroller
frame as shown.(Figure 3.2)
Infant Bed Mode
Steps are as follows:
①
Pull the shoulder belt through the slots of seat back and seat cushion.
②
Pull the waist strap through the slots of seat back and seat cushion.
③
Pull the crotch belt through the slot of seat panel and hide inside.
Reversing the Seat Unit ( Figure 4.1 )
①
Rotate the knob as shown with both hands, lift upwards and remove seat unit from the mounts.
②
Turn the seat unit and re-insert into seat unit mounts.
③
Pull up the seat unit gently to check it is securely attached.
Note: Ensure to check seat position adjustment button is firmly secured when
carrying a child.
Note: It is recommended to adjust the seat unit before assembling with stroller
frame for easy handling. Customer can also choose to adjust the seat
unit after assembling with stroller frame.
Note: Seat mode is suitable for child over 6 months old or over 9 kg in weight.
The seat unit and the frame are not assembled together when shipped.
Steps of converting the seat unit into a baby bed: ( Figure 3.3 )
①
Pull down the seat reclining buckle.
②
Pull downwards seat position adjustment button until the seat unit is completely flat.
③
Release the button on one side of the seat unit.
④
Smooth flat the bottom of seat unit.
⑤
Fasten the snaps as shown.
WARNING:
For the safety of the infant, do not carry the baby bed only.
Note: It is recommended to remove or hide safety straps when infant
bed mode is in use.
Note: Infant bed mode is suitable for infant from newborn to 6 months old.
Note: Infant bed mode is restricted for use by infant who cannot sit up
unaided, roll or use arms and knees to support themselves only.
Maximum carrying weight: 9 kg.