Combi I-Thruller, Инструкция по эксплуатации

Страница: 22 / 59

Adjusting the crotch belt ( Figure 5.3 )
Tightening - Pull the center belt end as shown direction.
Extending - Pull out the length needed to adjust to direction . Pull toward direction to extend
the crotch belt.
Detaching the seat cushion ( Figure 5.4-6.1 )
①
Press on the buckle button to release the insert plastics.
②
Remove shoulder belt cover and crotch belt cover if fitted.
③
Open fastener at front of seat unit, release the snaps located inside.
④
Loosen the snaps on both sides of the seat cushion from seat back.
⑤
Unfasten snaps at foot end of seat cushion.
⑥
Remove seat cushion.
To install seat cushion, go in the steps reverse.
Assembly of canopy ( Figure 6.2 )
①
Line up the tab on canopy with the groove of seat unit in the direction as shown.
②
Fasten snap of canopy to seat unit fabrics.
③
Hang the strap at back of canopy on seat position adjustment button.
To detach canopy, go in the steps reverse.
Attaching the shoulder belt ( Figure 6.3 )
Pull the shoulder belts through insert outlets on the backbord and put through the seat belt
insert of cushion.
Use the same level of shoulder belt insert outlets on the seat cushion as well as one the
backbord.
Attaching the waist belt ( Figure 6.4 )
Pull the waist belts through insert outlets on the backbord and put through the seat belt
insert of cushion.
Removal of Front Wheels ( Figure 7.2 )
Press the button located at lower part of foot rest and pull out the front wheel with little
force.
WARNING:
Always use the restraint system.
Basket ( Figure 7.1 )
You can attach and remove the belts and snaps according to step 1 , 2 and 3.
The basket can carry a maximum weight of 10kgs.
Removal of Rear Wheels
To remove the left rear wheel, press the button as shown. (Figure 7.3)
To remove the right rear wheel, press the button at the bottom of parking brake and pull
out the rear wheel with little force.(Figure 7.4)