15
Section 6 - Securing Infant in Infant Car Seat
16
Section 6 - Securing Infant in Infant Car Seat
Non-Adjustable Headrest Models
If the height of the shoulder straps needs
adjusting, turn the infant car seat over and
detach the straps from the steel connector
plate.
Reposition the straps as required and
reattach the straps.
Place harness straps over infants shoulders
and thighs, and secure the Harness Buckle.
The harness must be a snug (not loose) fit
on the infant.
A snug strap should not allow any slack. It
lies in a relatively straight line without
sagging. It does not press the infant's body
into an unnatural position.
To increase the tension of the harness, pull
the harness adjuster strap
IMPORTANT: Check that the shoulder straps
are securely attached to the connector
plate. Straps must not be twisted!
IMPORTANT: You should hear a "click" as
the buckle tongues engage.
"CLICK"
