43
Section 11 - Vehicle Belt Systems
44
Section 11 - Vehicle Belt Systems
Combination Lap/shoulder Belt with Free
Sliding Latch Plate
Pull out on latch plate. If belt slides freely
through latch plate, the Locking Clip
MUST be used .
Some combination lap/shoulder belts with
free sliding latch plates may be converted
into an automatic locking model. Always
use the Locking Clip with these belt
systems.
Combination Lap/shoulder Belt with
Locking Latch Plate
Vehicle seat belts with locking latch plates
normally hold an infant car seat tightly.
However in some cases, the locking latch
plate on some seat belts may slip and loosen
after being buckled on infant car seat if
positioned at a certain angle. If this happens,
flip the latch plate over and re-buckle. Test
installation again to see if this works. If not,
move infant car seat to another seating
location.
PASSIVE RESTRAINTS
Lap Belt with Motorized Shoulder Belt
DO NOT use with any infant car seat.
PASSIVE RESTRAINTS
Lap or Shoulder belt mounted on Front
Door
DO NOT use an infant car seat in any front
seating location that has belts mounted to
the front doors. Belts will not stay tight when
driving.
Front Door