Combi AuraStar, Инструкция по эксплуатации

Страница: 22 / 40

1
3
2
4
21
Detaching the seat cushion 座墊的拆除方法
Press on the buckle button to release
the insert plastics.
Remove shoulder belt cover and
crotch belt cover if fitted.
Unfasten snaps on both sides of the
seat cushion(2 places).
Pull out crotch belt from seat cushion.
Loosen the snaps (upper) on both
sides of seat cushion from seat back
(4 places).
Remove waist belt and shoulder
belt, then remove seat cushion from
backrest.
1
2
3
4
WARNING
:Make sure the
seat cushion has been correctly
attached before use.
1
3
2
4
1
2
4
5
6
5
6
3
Adjust the length of shoulder belt
調節肩帶高度
Release the shoulder belt from the seat cushion and backrest
(after the rear velcro is released, pull the buckle inside the
seat sleeve outward).
Insert the shoulder belt through the correct slots on the seat
cushion, make sure you use the slots in the same height.
1
2
1
2
按下安全帶扣按鈕，將插扣片從安全帶
扣解下。
如若配戴了肩帶套和中央帶套請先一
併拆下。
將座墊兩側的扣子解開（2處）。
將中央帶從坐席拉出。
將座墊上部的扣子從靠背上解開（4處）。
將肩帶、腰帶從座墊抽出，然後將座墊抽出。
警告
： 使用手推車前務必確認座席已正確安裝。
To install seat cushion, go in the
reversed steps.
安裝時請以逆序進行。
先將肩帶從座墊及靠背（後面的魔鬼氈打開後，從座套內的釦子往外）
解除。
將肩帶穿過座墊上正確對應位置的穿孔，並確認兩邊穿孔在適當的高度。
Note : The lowest shoulder belt insert outlet should be used
for children under 6 months.
小提示：當幼兒未滿六個月時，請使用最低的肩帶穿孔。
45
6