USER MANUAL FOR COMFLEX-6900
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 56
Figure 67: Flow to select
Note:
Calibration is to adjust MU and RU gain to make sure system gain is normal, if the band have been
calibrated, users can click
to skip the process; if the band never been calibrated, users click
in the step of Calibration, software can still procede to the next step of MU and RU setup, but the
system gain will be a little deviation with normal valuer, so the final output power will be not same with the
target DL output power.
NOTE: Make sure all the ANT ports of RUs are connected with dummy load or antenna system
before proceeding to step 5.
Step 5:
Select Calibration and click
to enter to Calibratiion page after finishing Parems Setting.
