InteliLite 4 AMF20+AMF25 Operator Guide
23
Note:
Use Enter button to confirm the PIN and Loging or Page button to cancel entering the Login.
Note:
In case that invalid UserID or PIN are entered, the controller shows Wrong Credentials screen. Use
Enter button to enter Login again or Page Button to go back to menu.
4.1 Account break protection
The controlleris protecting the useraccounts against breaking by a brute-force attack, i.e against breaking
into the controllerby fast repeating attempts to login with credentials generated from the range of all
possible combinations.
If the account break protection detects a possible attack and blocks an account orinterface the alarm
Wrn
Brute Force Protection Active
is activated. The alarm can be used to send an active message (e.g. e-
mail)to inform about that situation The detailed behaviorof the controllerdepends on situation.
4.1.1 PIN protection
If an userperforms
ten consecutive attempts
to login using UID/PIN, providing
correct UID
but
incorrect PIN
, the useraccount is permanently blocked forlogin using UID/PIN. The usermust login
with username/password and change the PIN to unblock this login method again.
4.2 Reset accounts to factory default
If credentials (username and/orpassword)foradministratoraccount are lost, it is possible to reset all user
accounts to the factory default state. Formore information
see Resetting the administrator password
on page 1
.
Afterreset procedure useraccounts are in factory default state.
Wrn Default Password appears in alarmlist when the default administratorpassword is set and
communication module is plagued in the controller. The purpose of alarm is to inform that the
controllermight be oris connected to the untrusted interface and cybersecurity rules are not fulfilled cause
there is default administratorpassword.
