Page 8 of 28
INSTRUCTION MANUAL
CLCI-100
BULK CURRENT INJECTION PROBE
with
FCLC-100
CALIBRATION FIXTURE
1912 1 E l T o ro R d
●
Si l vera do, Ca lifo rni a 9 26 76
●
(9 49) 459 -96 00
●
co m-p o wer. com
REV051917
3.4 Product
Features
3.4.1
Description of CLCI-100 Bulk Current Injection Probe Features
FIGURE 1 -
CLCI-100 Bulk Current Injection Probe Features
Input/Output Port
1
When used for bulk current injection, this is the input port of the probe. When used as a
measuring device, this is the probe’s output port. It is fitted with an N-type coaxial
connector.
Spring-loaded Clasps
2
These two (2) clasps, when secured over their respective brackets, lock the clamp into its
closed position
Clasp Brackets
3
These two (2) brackets anchor the respective clasp brackets in order to lock the clamp into
its closed position.
Clamp Window
4
This clamp window is aperture in the center of the clamp through which the wire(s),
cable(s) or cable bundle(s) to be tested are passed through.
CLCI-100
Bulk Current Injection Probe
10 kHz to 100 MHz
Max Input: 100 Watts (CW)
www.com-power.com
CAUTION
Hazardous voltages present
during operation. Do not handle
probe while test is in progress.
1
2
(clamp closed)
SIDE VIEW
(clamp open)
TOP VIEW
2
2
1
1
4
3
3
3
34
4
3
All manuals and user guides at all-guides.com
