Columbia CT-10 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 56

Columbia CT-10 Скачать руководство пользователя страница 53

C T S P E C I F I C AT I O N S A N D D ATA

CT BOILER/BURNER UNITS: Completely assembled, piped, wired & factory tested with steam pressure gauge, water level gauge, gauge cocks with ball checks, gauge glass protector, steam
safety valve, steam supply ball valve, boiler and water column blowdown valves, hand hole inspection plate assemblies, feedwater inlet ball valve & check valve, jacket and 3'' poured
refractory insulation, water column with probe type low water cut-off and pump control, additional probe type low water cut-off with manual reset, steam pressure control, steam hi-
limit pressure control with manual reset, feed pump motor contactor, and UL listed burner with safety and operating controls. CSD-1 approval is standard on all boilers.
* CT35 and CT50 are built on a solid steel skid base.

CT35 skid base 45" x 48-1/2" CT50 skid base 56" x 66" (WxL) *CT Boilers built for 15 psi steam have 3" outlet

CT-10 CT-15 CT-20 CT-25 CT-35* CT-50*

RATINGS:

Horsepower 9.5 15 20 25 35 50
Gas Input (BTU per hour) 399,000 630,000 840,000 1,050,000 1,470,000 2,100,000

Oil Input (Gals. per hour) 2.85 4.50 6.00 7.50 10.50 15.00

Output (BTU per hour) 320,000 504,000 672,000 840,000 1,176,000 1,680,000

Output (Lbs. steam per hour) 320 517 690 862 1207 1725

Maximum Allowable Working Pressure 150 150 150 150 150 150

Water Capacity (Gals.) 52 70 86.5 110 90 240

Steam Release Surface Area 389 sq in 389 sq in 501 sq in 627 sq in 817 sq in 1402 sq in

Hand Hole Sizes

(3)3x3-3/4 (3) 3x3-3/4 (4)3x3-3/4 (4)3x3-3/4 (4) 3x3-3/4 (4) 3x3-3/4

BOILER DIMENSIONS:

A Boiler Height (includes piping) 63" 80" 82" 90" 96'' 103''
B Boiler Diameter

36" 36" 39" 42" 43'' 56''

(left to right, packaged including M & M)

C Boiler Diameter

34" 34'' 37" 40" 43'' 56''

(left to right, less trim & piping)

D  Burner to Flue Outlet (approx.)   58"   58"   59-1/2" 64" 71''   94''
E  Flue Outlet (diameter) 6"   8''      8"   10" 12''   12''
F  Flue Outlet to Floor (centerline)   40-1/4"   56-1/4''   57-1/4"   61-5/8"   69'' 76-1/4''
G  Steam Outlet (IPS)*   3/4"   1''         1" 1-1/4"   1-1/4'' 2''
H  Feedwater Inlet (IPS)   1/2" 1/2''     3/4" 3/4"   3/4''   1''
I  Feedwater Inlet to Floor (centerline)   9-1/4"   9-1/4'' 11-1/4"   11-3/4"   13-1/2''   15-1/2''
J  Blowdown Outlet (IPS)   1"   1''     1"   1" 1''      1-1/4''
K  Normal Water Line to Floor 42"   59"   59-1/2''   67''   71-1/2''   81-1/2"

Approx. Floor Space

3.25'x5.5'

3.25'x5.5' 3.25'x5.5'

4' x 6' 5' x 8' 6' x 10'

CRATED DIMENSIONS:

Left to Right 41-1/2"   41-1/2"       44"   44"   45-1/2'' 56''
Front to Rear 67"   67" 72"   72" 77''   96''
Height 86"   86" 95"   95" 95''   104''

Approx. Shipping Wt. (skidded & crated) 1900 lb 2500 lb 3150 lb 3450 lb 4650 lb 6200 lb

«
...
51
52
53
54
55
...
»

Содержание CT-10

























































Отзывы:

Нет отзывов