Columbia 26J Скачать руководство пользователя | Manualshive

Страница: 16 / 36

background image

Speed Control Lever

The speed control lever, located on the right side of the tractor’s

steering console, allows you to regulate the ground speed of the

lawn tractor.
To use, depress the clutch-brake pedal and move the lever out

of the parking brake notch and forward to increase the tractor’s

ground speed. When a desired speed has been reached, release

the lever into an appropriate notch to maintain that speed.
To slow the tractor’s ground speed, depress the clutch-brake

pedal and move the speed control lever rearward and release it

into a notch.

Parking Brake

To set the parking brake, fully depress the clutch-brake pedal.

Move the speed control lever all the way down and into the

parking brake position. Release the clutch-brake pedal to allow

the parking brake to engage.
To release the parking brake, depress the clutch-brake pedal and

move the speed control lever out of the parking brake position

into the desired position. Release the clutch-brake pedal.

NOTE:

The parking brake must be set if the operator leaves the

seat with the engine running or the engine will automatically

shut off.

Fuel Lever Indicator

The Fuel Lever Indicator is located below the seat on the left

hand side from the operator’s position in the controls panel. Use

this window to identify the tractor’s fuel needs. See Figure 4-5.

Figure 4-5

Deck Lift Lever

Found on your tractor’s right fender, the deck lift lever is used to

change the height of the cutting deck. To use, move the lever to

the left, then place in the notch best suited for your application.

PTO

(Blade Engage)

Lever

Found on the tractor’s right fender, the PTO

(blade engage)

lever is used to engage power to the cutting deck. To operate,

move the lever all the way forward. Moving the lever all the way

rearward into the PTO OFF position disengages power to the

cutting deck.

NOTE:

The PTO

(blade engage)

lever must be in the disengaged

(PTO OFF) position when starting the engine.

Fuel Fill Cap

The Fuel Fill Cap is located below the seat. Refer to the Set-up

section in this manual for instructions on fueling this tractor.

Oil Fill Cap

The Oil Fill Cap is located below the seat. Refer to the Set-up

section in this manual for instructions on checking and adding

oil to this tractor.

16

S

ection

4— c

ontrolS

& F

eatureS

«
...
14
15
16
17
18
...
»

Содержание 26J





































Отзывы:

Нет отзывов

Похожие инструкции для 26J

Бренд: Ransomes Страницы: 64

Wheel Horse 265-6

Бренд: Toro Страницы: 44

Бренд: Yard-Man Страницы: 8

Бренд: Caiman Страницы: 25

Бренд: Toro Страницы: 80

Бренд: RADLEY Страницы: 30

Бренд: McCulloch Страницы: 44

Бренд: Matrix Страницы: 68

Бренд: Garland Страницы: 47

Бренд: Ozito Страницы: 8

Flex Cut RMR 230 H

Бренд: Wiedenmann Страницы: 55

Бренд: Gtech Страницы: 32

Бренд: P.Lindberg Страницы: 123

Бренд: Yard Machines Страницы: 27

Бренд: Honda Страницы: 24

Бренд: Eliet Страницы: 106

Бренд: Yard-Man Страницы: 32

Бренд: Toro Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды