Columbia 26J, Руководство оператора

Страница: 11 / 36

11 S
ection
3 — A
SSembly
& S
et
-U
p
6. Remove the pedestal cap mount pan head screw that
is factory installed and located on the tractor’s steering
console. Retain the screw for later instructions.
7. Slide the pedestal cap down onto the tractor (1) and slighty
rotate to the right to clip into place. Secure the pedestal
with the pan head screw (2) previously removed. See Figure
3-3.
Attaching The Seat
If the seat for your tractor was not attached at the factory, follow
the applicable instructions below to attach it.
1.
Remove the shoulder bolts and lock nuts from the seat
mounting bracket included in your hardware pack. See
Figure 3-4.
2. Using a 1/4-inch drive ratchet with a 3/8” socket, remove the
two self-tapping bolts factory installed on the tractor. See
Figure 3-5.
3. Position the seat mounting bracket assembly in place over
the holes, as shown in Figure 3-6. Secure mounting bracket
with the self-tapping bolts previously removed.
CAUTION:
Do not use any type of power tool (e.g. impact gun
or electric drill with nut driver attached) when tightening the
self-tapping bolts to attach the seat bracket.
1
2
Figure 3-3
Figure 3-4
Figure 3-5
Figure 3-6
11