40
Capricorn FLX Weather Station
________________________________________________________________________
Columbia Weather Systems, Inc.
Mounting Method
Choose the appropriate mounting method for the installation and obtain
the necessary mounting hardware. Refer to Section 4 for information on
available optional sensor mounting hardware and accessories.
Do not mount sensors close to power lines.
Once the Wind Sensor has been mounted, route the cable back to the
Control Module
Using a small straight screw driver, attach the wires from the end of the
Wind Sensor cable to the Wind Speed & Direction terminal blocks on the
Control Module as follows:
Wind Direction:
White Wire
- Terminal #7
Green Wire
- Terminal #8
Brown Wire
- Terminal #9
Wind Speed
(same cable as wind direction):
No Connection
- Terminal #10
Black Wire
- Terminal #11
Red Wire
- Terminal #12
Connect the bare wire to the chassis ground terminal on the front panel
of the Control Module enclosure.
Installing the Heavy-Duty Wind Sensor
Choose the appropriate mounting method for the installation and obtain
the necessary mounting hardware. Refer to Section 4 for information on
available optional sensor mounting hardware and accessories.
Do not mount sensors close to power lines.
Once the Wind Sensors have been mounted, route the cables back to
the Control Module.
Using a small straight screw driver, attach the wires from the end of the
Wind Sensor cables to the Wind Speed & Direction terminal blocks on
the Control Module as follows:
