SciCan Ltd., 1440 Don Mills Rd, Toronto, ON M3B 3P9, Canada
US Office, 701 Technology Dr, Canonsburg, PA 15317, USA
SciCan GmbH, Wangener Str. 78, 88299 Leutkirch im Allgäu, Germany
f.
Rinse the filter under running water and dry it before re-installing.
g.
Fill clean reservoir tank with distilled water using either top or front manual fill
4.
Clean and fill the Venturi reservoir
NOTE: If you did not drain your Venturi water reservoir, please start at Step 4a. If you drained
your reservoir and waste bottle prior to closing your office, please start at Step 4c.
a.
Open the unit door to connect the drain tube to the Venturi reservoir’s fron
t draining
port. Drain the reservoir completely.
b.
Empty the container
c.
Using a soft bristle brush, scrub the corners and loosen any
deposits.
d.
Wipe the reservoir’s surfaces using OPT
IM
wipes or a clean,
lint-
free cloth dampened with water. Rinse the reservoir’s
surfaces with distilled water and drain it using the front drain tube
e.
Remove the reservoir filter by pulling up on the filter’s tab.
f.
Rinse the filter under running water and dry it before re-installing.
g.
When filling the Venturi reservoir after a period
of non-use, you may need to add an additional
0.5 US gal / 2 L of water. This will fill the steam
cooling system’s condenser. To do this, simply fill
the Venturi reservoir to the maximum fill line and
wait as the Venturi reservoir water fills the
condenser, then top up the Venturi reservoir to
the maximum fill line again.
5.
Run one empty Hollow Unwrapped cycle
Note: if using an external water reservoir tank, ensure it is filled with water prior to starting the cycle
Note: It is important to follow the recommendation of your local guidelines for the appropriate
sterilization monitoring requirements after a period of non-use.
For more information on performing machine maintenance, preparing unit for use and troubleshooting
tips, please refer to the STAT
CLAVE
