5.30 Printer / Data Logger Setup
The HYDR
IM
L110w G4 has an RS-232 port at the back, and can be used with
an external printer or the SciCan Data Logger. The printers in the chart below
have been tested with the HYDR
IM.
To add or change a printer or SciCan Data
Logger, follow these steps:
Turn off the HYDR
IM
and the printer or Data Logger before connecting these
devices to the unit.
1.
With the printer or Data
Logger connected, turn on
the HYDR
IM
and press the
i
to move to the Menu screen.
2.
In the Setup Menu, select
Printer Selection.
3.
Select Serial Printer if
connecting a printer, or USB
Flash/MSD if connecting the
SciCan Data Logger. Press
the back arrow to return to
the Setup Menu.
4.
In the Setup Menu, select
Baud rate.
5.
Select the rate required
(refer to chart below for
recommended Baud rates).
Use the back arrow to return
to the Start screen.
6.
Ensure that the date and time have been set (see Setup Menu – Date / Time)
7.
Now the HYDR
IM
will write its cycle information to the device chosen.
Printer Model
Serial Port
Baud Rate
Epson
TM-U220D (C31C515603)
9600
Citizen
IDP-3110-40 RF 230B
9600
Star Micro
SP212FD42-230
9600
Star Micro
SP216FD42-230
9600
Star Micro
SP512MD42-R
9600
SciCan Data Logger
Serial Port
Baud Rate
For Mass Storage Device
9600
5. Instructions for Use –
29
