manualshive.com logo in svg

Colortrac 3640e, Инструкция по установке и эксплуатации

Поделиться
Скачать
Colortrac 3640e Скачать руководство пользователя страница 13

Colortrac Scanner Operator Manual.

13

7 MAINTENANCE

7.1 Left/Right and Front Back Stitch

If the scanner has been transported, the alignment of the cameras may need adjusting.
This can be carried out automatically by inserting the auto stitch target centrally (except
4280e models where the target is offset - see markings on target) into the scanner and
selecting the option on the host software to carry out the auto stitch operation. The 3640e
scanners have no auto-stitch function because they are single camera devices.

7.2 Colour Calibration

The scanner may require to be colour calibrated. This ensures that the scanner produces
the correct colours across the scan. This can be carried out automatically by inserting the
Calibration Target into the scanner and selecting the option on the host software to carry
out white balance. The Calibration Target fits over the scan slot and depending on your
firmware revision may be driven during calibration.

Depending on type of target issued the target may be found inside the lid of the scanner.

In order to achieve the best colour response from the scanner it should be left on
continuously.

7.3 Service Requirements on Tubes and Lubrication

The scanner will require a yearly service to ensure that it gives the best performance. The
details of this service can be obtained from your distributor.

Содержание 3640e


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды