RDM (Remote Device Management)
This product supports RDM communication protocol. RDM is a protocol that supports two-way traffic in the standard
DMX512 protocol. RDM controls devices and configurations, and detects lights, changing the DMX address of the fixture,
DMX mode, etc. Each RDM - compatible light can be identified by the built-in unique UID code.
Parameter ID
Discovery Command
SET command
Get Command
DISC_UNIQUE_BRANCH
*
DISC_MUTE
*
DISC_UN-MUTE
*
DEVICE_INFO
*
SOFTWARE_VERSION_LABEL
*
DMX_START_ADDRESS
*
*
IDENTIFY_DEVICE
*
*
SUPPORTED_PARAMETERS
*
SENSOR_DEFINITION
*
SENSOR_VALUE
*
DMX_PERSONALITY
*
*
DMX_PERSONALITY_DESCRIPTION
*
RESET_DEVICE
*
FACTORY_DEFAULTS
*
When the fixture is in INFO mode, press ‘SET’ and ‘DOWN’ button for 2 seconds to revise the UID mode.
NOTES:
•
If no buttons are pushed for 30 seconds, the screen will lock and show current operating mode, WDMX mode,
temperature status and battery (this battery is reference value, changes for on and off is very large) To unlock press the
‘MODE’ and ‘SETUP’ buttons for 3 seconds.
•
Press ‘MODE’ and ‘SETUP’ at the same time to quickly lock under unlock status.
•
When the product powers on and shows version information, pressing the ‘MODE’ and ‘SETUP’ buttons at the same time
for a few seconds. After this, it can restore factory settings and the data will be initialized.
•
Please follow the user manual to ensure safe installation and operation.
•
To prevent overheating, please use within the acceptable ambient temp range, 14° F to 104° F.
•
Do not take down the light while it’s plugged in.
800.595.6302 coloronix.com
|
9
ColorFlood Square
C-SS2-RGBW-10S-24