Colormetrics V1506, Руководство пользователя

Страница: 35 / 71

35
www.colormetrics.info Color metrics V1506
36
"Raw Data" is an output of the decoded magnetic stripe data in hexadecimal format (no ASCII
character conversion is performed). In the Raw Data setting, the reader outputs all
track-decoded data. The MSR will represent the raw data with two ASCII characters: the first
ASCII character is for high bits of the raw data byte and the second is for the low bits. For
example, the two ASCII characters "4"and "1"represent raw data byte 41h (01000001).
Beep Volume
The Beep volume can be adjusted to four loudness levels or off. Four loudness levels are:
Quick High
Quick Low
High
Low
The default is High beep.
Terminal Type
NoteBook
IBM-PC/AT
IBM-PC/AT, External keyboard
IBM-PC/AT, No External keyboard
The firmware can be programmed to interface as a keyboard wedge to 4 different types of
terminals. The default is IBM-PC/AT.
Inter-Character Delay
:
2ms, 5ms, 10ms, 20ms, 50ms, 100ms;
This is the time period the reader will delay between sending successive characters. Some
terminals or computers (host) require an inter-character delay to simulate the effects of
keystroke delays. Choosing a longer inter-character delay causes the characters to be sent at
a slower rate. If the host system is not capable of receiving characters as fast as the reader