5
www.colormetrics.info
Color
metrics P1000
4
CE Notice
This device complies with the requirements of the CE directive.
FCC Notice
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This device generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can be determined by turning the
device off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device to an AC outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the device.
WEEE Notice
This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste
electrical and electronic equipment (WEEE). The Directive determines the framework for the
return and recycling of used appliances as applicable throughout the European Union. This
label is applied to various products to indicate that the product is not to be thrown away, but
rather reclaimed upon end of life per this Directive.
1. Packing List
6
1-1
Standard
Accessories
6
1-2
Optional
Accessories
6
2.
System
View 7
2-1
Rear
View 7
2-2
Back
View 7
2-3 Specification
8
2-4
Internal
Layout
9
3. Pin Definition
10
4. Rear I/O Interface
14
5. System Assembly & Disassembly
15
5-1
HDD
15
5-2
Memory
16
5-3
MSR
/
i-Button
17
5-4 VFD / 8“ or 10,4“ 2
nd
Display
18
6. Device Driver Installation
19
6-1 Configuration Utility of i-Button Reader
19
6-2 Install framework 4.0
25
6-3 Configuration Utility of VFD
27
7. BIOS/Utility Setup
32
7-1
Advanced
34
7-1-1 Boot Configuration
35
7-1-2 Audio Configuration
36
7-1-3 Video Configuration
37
7-1-4 SATA Configuration
38
7-2
Security
39
7-3 Power
40
7-4
Boot
41
7-5
Exit
42
8.
LCD
Surface
Cleaning
43
