Colormetrics P1000, Руководство пользователя

Страница: 23 / 43

23
www.colormetrics.info Color metrics P1000
23
Configure word detail
Area 1
Track 1 (JIS II) Enable: If enabled, the track 1 data will response.
Track 2 Enable: If enabled, the track 2 data will response.
Track 3 Enable: If enabled, the track 3 data will response.
Upper Case: If selected, the track1 data read will transfer to upper case
before response.
Track Separator
/Terminator Enable:
If enabled, the reader will send Track
Separator and Track Terminator code defined in this configure
word between
tracks data or after the last track data.
Track Error Report Enable: If enabled, the character “ F” will response when track data read
fail.
Track Sentinel Enable &
Replaceable:
If enabled, the reader will send start and
end sentinel at begin and last position of
each track data.
If replaceable, these sentinels will be
replaced by the sentinel defined in this
configure word.
Area 2
Head/Tail Enable: If enabled, all of the Head/Tail message
defined in this configure word will prefix
and suffix to each data returned.
Area 3
iButton Enable: If enabled, iButton key ID may response when key attached or
removed.
Area 5
Beep Enable: If enabled, the beeper will activate to
23
Configure word detail
Area 1
Track 1 (JIS II) Enable: If enabled, the track 1 data will response.
Track 2 Enable: If enabled, the track 2 data will response.
Track 3 Enable: If enabled, the track 3 data will response.
Upper Case: If selected, the track1 data read will transfer to upper case
before response.
Track Separator
/Terminator Enable:
If enabled, the reader will send Track
Separator and Track Terminator code defined in this configure
word between
tracks data or after the last track data.
Track Error Report Enable: If enabled, the character “ F” will response when track data read
fail.
Track Sentinel Enable &
Replaceable:
If enabled, the reader will send start and
end sentinel at begin and last position of
each track data.
If replaceable, these sentinels will be
replaced by the sentinel defined in this
configure word.
Area 2
Head/Tail Enable: If enabled, all of the Head/Tail message
defined in this configure word will prefix
and suffix to each data returned.
Area 3
iButton Enable: If enabled, iButton key ID may response when key attached or
removed.
Area 5
Beep Enable: If enabled, the beeper will activate to
24
indicate the operation result.
Area 6
Track 1 (JIS II) Request:
If selected, the reader will response track
data only if track1 read correctly.
Track 2 Request: If selected, the reader will response track
data only if track2 read correctly.
Track 3 Request: If selected, the reader will response track
data only if track3 read correctly.
Area 7
Off iButton ID Request:
If selected, key ID will response while key
removed.
Area 8
Off RFID ID Request:
If selected, RFID ID will response while
RFID card removed.
Area 9
Tracks Sequence Request:
Select the order of three tracks data
returned.
Area 10
iButton ID Range Request:
Define the ibutton data range returned.
Area 11
Language Option:
Select one of supported keyboard language
for PS2 or keyboard USB interface.
Area 12
Track 1 (JIS II) Start
Sentinel:
Define Track 1 Start sentinel byte, default is “%”.
Track 2 Start Sentinel: Define Track 2 Start sentinel byte, default is “;”.
Track 3 Start Sentinel: Define Track 3 Start sentinel byte, default is “+”.
Tracks End Sentinel: Define all Tracks End sentinel byte, default is “?”.
Tracks Separator: Define the insertion byte between each track data returned.
Tracks Terminator: Define the appending byte after the last track data returned.
24
indicate the operation result.
Area 6
Track 1 (JIS II) Request:
If selected, the reader will response track
data only if track1 read correctly.
Track 2 Request: If selected, the reader will response track
data only if track2 read correctly.
Track 3 Request: If selected, the reader will response track
data only if track3 read correctly.
Area 7
Off iButton ID Request:
If selected, key ID will response while key
removed.
Area 8
Off RFID ID Request:
If selected, RFID ID will response while
RFID card removed.
Area 9
Tracks Sequence Request:
Select the order of three tracks data
returned.
Area 10
iButton ID Range Request:
Define the ibutton data range returned.
Area 11
Language Option:
Select one of supported keyboard language
for PS2 or keyboard USB interface.
Area 12
Track 1 (JIS II) Start
Sentinel:
Define Track 1 Start sentinel byte, default is “%”.
Track 2 Start Sentinel: Define Track 2 Start sentinel byte, default is “;”.
Track 3 Start Sentinel: Define Track 3 Start sentinel byte, default is “+”.
Tracks End Sentinel: Define all Tracks End sentinel byte, default is “?”.
Tracks Separator: Define the insertion byte between each track data returned.
Tracks Terminator: Define the appending byte after the last track data returned.