www.colorato.net
USAGE AND MAINTENANCE MANUAL
FOR A SOLID FUEL STOVE
1. Technical specification:
MODEL
BULK DIMENSION
NET
WEIGHT
THERMAL
POWER
OUTER
DIAMETER OF
SMOKE PIPE
CLWS-O8G
465 x 390 x 790 mm
54 kg
7-8 kW
120 mm
CLWS-08GO
465 x 390 x 990 mm
57 kg
7-8 kW
120 mm
CLWS-07G
330 x 360 x 930 mm
39 kg
5-7 kW
120 mm
CLWS-12OV
500 x 450 x 1030 mm
98 kg
10-12 kW
120 mm
CLWS-09SSD
450 x 490 x 930 mm
55 kg
8-9 kW
120 mm
CLWS-09CSD
450 x 490 x 930 mm
66 kg
8-9 Kw
120 mm
CLWS-09CRS
450 x 490 x 930 mm
64 kg
8-9 kW
120 mm
CLWS-09CRC
450 x 490 x 930 mm
75 kg
8-9 kW
120 mm
2. Installation:
- the stove must not be placed near wooden or plastic furniture parts, nor near cooling
devices. Minimum distance between the stove and such elements must be 30 cm.
- if the stove is placed on the floor made from combustible materials (wood, itison, floor
plastic, etc.) it is necessary to protect the floor with metal sheet 10 cm width from the sides
of the stove, and 50 cm from the front side of the stove.
- the stove should be attached to a chimney with inner diameter of at least 120 mm and
height of 6 m. If multiple stoves are attached to a single chimney, the attachment distance
should be at least 2 m.
3. Usage:
- the stove uses wood, wood briquettes or a coal with less calories (brown coal, lignite…) as
a fuel
- the heating strength depends on the type and quality of fuel used
- the initial heating of the stove should be gradual to avoid sudden stresses on the material.
Do not use the stove with capacity during the first 8-10 hours (1-2 days) of firing.
- Thermoresistant color on the stove will be fully formed after the first firing of the stove
- make sure that the air regulator (located on the front side of the stove) and stack valve
regulator (located at the chimney spout) are fully opened when starting a fire
- the combustion intensity is regulated with the air regulator located at the front of the stove
by turning it left-right, and with stack valve regulator located at the chimney spout by
rotating it