COLORATO CLB-1500N, Инструкция по эксплуатации

Страница: 7 / 13

6
Operating your Blender
Before first use
Before using your blender for the first time,
remove any packaging material and
promotional labels. Ensure the appliance is
switched off and the power cord is unplugged
from the power outlet. Wash the lid, blender
jug, mixing rod and blade assembly of the
blender in warm soapy water, with a soft cloth.
Rinse and dry thoroughly. Do not place parts
in the dishwasher. The motor base can be
wiped with a damp cloth to remove any dirt.
Dry thoroughly.
When first using the Blender, you may
notice an odour coming from the motor.
This is normal and will dissipate with use.
All processing blades are extremely sharp.
Avoid any contact with hands.
Note
Assembling and attaching the
blender
5. Select the required speed function by
choosing either the Pulse operation by
pressing down the PULSE switch, either the
Continuous Operation, by lifting the
POWER switch. Speed can be changed at
any time during the blending process by
adjusting the Variable Speed Regulator
from the MINIMUM to the MAXIMUM. Press
down the POWER switch or let the PULSE
switch to stop blending.
6. For ingredients that require short bursts of
power, use the switch of the PULSE
function. Press the PULSE switch down for
short bursts until blending is complete.
7. The ice crush requires the highest speed
and is performed with the Pulse Operation
switch.
8. At the end of use, press down the POWER
switch or let the PULSE switch and unplug
the power cord from the power outlet.
Important- To crush ice
Place 1 cup of frozen ice cubes into the
Blender jug. Replace lid and press the PULSE
switch down. Once a snowy textured ice is
achieved, let the switch in order to stop the ice
crushing. This will take approximately 15
seconds.
During the blending process, ingredients may
stick to the sides of the Blender jug. To push
the food back onto the blades, press the
POWER switch down and unplug the power
cord from the power outlet. Remove the lid and
use a plastic spatula to scrape down the sides
of the jug. Replace the lid before
recommencing blending.
If any moisture of liquid appears on top of the
motor base, press the POWER switch down
and unplug the power cord from the power
outlet. Remove the blender jug. Wipe the motor
base immediately with paper toweling and
check the blender jug is correctly assembled.
1. Place the motor base on a flat, dry surface
such as a bench top. Ensure that the motor
is switched off and the power cord is
unplugged from the power outlet.
2. Turn the blender jug upright and insert on to
the motor base.
3. Add food or liquid into the blender jug.
Place the blender lid firmly into position on
the top of the blender jug.
4. Plug the power cord into a 230 / 240 V
power outlet and either lift the Switch of
Continuous Operation (POWER), or press
down the Switch of Pulse Operation
(PULSE). Always use one of the two
switches and never both of them together.
Note
NEVER PLACE ANYTHING OTHER THAN FOODS AND LIQUIDS IN THE
BLENDER WHILST THE MOTOR IS RUNNING.