COLORATO CLB-1500N, Инструкция по эксплуатации

Страница: 3 / 13

2
COLORATO recommends safety first
We at COLORATO are very safety conscious. We design and manufacture
consumer products with the safety of you, our valued customer foremost in mind.
In addition, we ask that you exercise a degree of care when using any electrical
appliance and adhere to the following precautions:
Important safeguards for your blender

Carefully read all instructions before
operation and save for future reference.

Remove any packaging material and
promotional stickers before using the
blender for the first time.
 Do not place the blender near the edge of
a bench or table during operation. Ensure
that surface is level, clean and free of
water, flour etc. Vibration during operation
may cause the appliance to move.

Do not place this appliance on or near a
hot gas or electric burner, or where it could
touch a heated oven.
 Always ensure the blender is properly
assembled before use. Refer to assembly
and operation (page 6).

Use only the blender jug and lid supplied
with the blender.

Always ensure the blender lid is firmly
positioned on the blender jug before
operating.

Do not leave the blender unattended when
in use.

Ensure that the switch in the control panel
is in OFF position and then unplug from
the power outlet before attaching the
blender or attempting to move the
appliance, or when the blender is not in
use and before cleaning and storing.

Do not operate the appliance continuously
for more than 3 minutes. After the 3
minutes, stop for one minute before you
continue.

Never place your fingers or utensils inside
the blender without unplugging the unit
from the power outlet.
 Be careful when handling the blending
blade as the blade is very sharp. Mis-
handling of the blade may cause injury.

Keep hands, hair, clothing, as well as
spatulas and other utensils away from the
blender jug during operation.

Do not remove blender jug from the motor
base whilst in operation. Remove the jug
only when the appliance is completely off.

To protect against electric shock do not
immerse the motor base, plug or cord in
water or any other liquid.
 Do not use the blender for anything other
than food and/or beverage preparation.

Do not process boiling liquids; allow to
cool before placing into the blender jug.
Make sure the motor and blade have
completely stopped, the POWER switch is
pressed down and it is unplugged from the
power outlet before disassembling.

Keep the appliance clean. Refer to care
and cleaning (page 8).