Page
4
of
12
Installation Instructions
1.
Inspect for any damage to heater and electric cord.
2.
Set the heater in a location of use ensuring that there is a minimum clearance of 3 feet (.91
meters) from all walls, the ceiling, and other objects.
3.
For this heater you must use an outlet capable of carrying
120 volts, 1,800 watts, and 20
amperes
.
4.
Turn the dial to the “High” position.
5.
Frequently monitor the room temperature.
6.
When done, turn off by turning the dial to the “Off’ position.
7.
Unplug the heater.
“CAUTION – High temperature, risk of fire, keep electrical cords, drapery,
Furnishings and other combustibles at least 3 feet (0.91 m) from the front of
the heater and away from the side and rear.”
“To reduce the risk of fire, do not store or use gasoline or other flammable
vapors and
liquids in the vicinity of the heater.”
SAVE THESE INSTRUCTIONS
Warranty or Repair Service.
For warranty or repair service, email [email protected] or call +1-303-532-2494 to obtain a Return
Authorization Form. Please have your Tri- Flo Heater model number and serial number handy. After
receiving your Return Authorization Form, use your retained packaging to ship your heating unit, with
insurance, to:
Colorado Tri-Flo Systems, LLC
711 S Bowen St, Suite C
Longmont, Colorado USA 80501-6744
To ensure proper handling, packages must be clearly marked on the outside of the package with the
Return Authorization number.
Packages not clearly marked with the Return Authorization number risk refusal.
For your records, staple or attach your original sales receipt to this owner's guide. Please write your Tri-
Flo Heater model and serial numbers (located on product spec decal) below:
Model Number:
______________________________
Serial Number:
______________________________
