Page
3
of
12
20)
This heater contains no user serviceable parts.
DO NOT OPEN THE HEATER
. Doing so can cause
physical harm. If the heater is opened the warranty is voided. Return heater to authorized
service facility for examination, electrical or mechanical adjustment, or repair.
21)
Use this heater only as described in this manual. Any other use not recommended by Colorado
Tri-Flo may cause fire, electric shock, or injury to persons.
22)
SAVE THESE INSTRUCTIONS
NO USER-SERVICABLE PARTS ARE INSIDE THE UNIT.
DO NOT OPEN THE HEATER.
REFER ALL REPAIRS
TO AN AUTHORIZED SERVICE REPRESENTATIVE AT COLORADO TRI-FLO SYSTEMS, LLC.
Operating Instructions
This is a free standing heater. It requires 3 feet (0.91 meters) of clearance around all its sides. Your unit
is shipped as a corded unit. When used as configured (corded) out of the box, its portability allows you
to move the heater from one location to another.
Wiring
In accordance with ANSI/NFPA 70, the
ER1800W.01 120V
heater unit comes with a 7 foot cord and plug.
The plug must use an outlet capable of carrying
120 volts, 1,800 watts, and 20 amperes.
Maintenance
Keep small objects from entering the unit.
When not in use for long periods the heater may collect dust on it and in it. Wipe down the outside shell
with a damp cloth and if possible use compressed air to blow out the inside.
Make sure unit is unplugged and cool before preforming any maintenance.
Controls
The heating unit has a bulb thermostat dial mounted on the unit.
